volume problem

  • This topic is empty.
Viewing 1 reply thread
  • Author
    Posts
    • #572
      Zortam Support
      Keymaster

      Hello,

      I have a question, if I can have a few minutes of your time.

      I have several tracks of the same song. I am trying to figure out a way to
      remove the worse of the tracks. Most of my music is older country, so my
      main concern is “volume”. If I run a volume analyze I get values with + & –
      signs and a few with a value of 0. What I need to know is what these
      numbers translate into.

      My understanding is a – sign means the track volume is “Louder” than the
      89db, and a + sign means the track volume is “Lower”.

      The larger the – number, the louder the music.

      Is this right, or am I looking at it the wrong way?????

      all three tracks have the same bit rate, duration, and file size.

      I hope I have made my question understandable.

      Thanks again for you great program. I use it Daily.

      Thanks for any help you can give me.

    • #1400
      Zortam Support
      Keymaster

      Hello,

      89.5 is default normalizaion level. So it is calculated as offset from 89.5 db

      so if normalized to 84.5 db

      89.5 – 84.5 = +5db (needs 5db to be normalizad to default level 89.5db)

      if normalized to 94.5 db

      89.5 – 94.5 = -5db (needs -5db to be normalizad to default level 89.5db)

      Zortam Support

Viewing 1 reply thread
  • You must be logged in to reply to this topic.